精品亚洲狠狠伊人免费高清导航综合_无码超碰五月香蕉在线观看_天天伊人免费高清天天视频_在线综合欧美二区亚洲热香蕉天天视频

What are the characteristics of earless retaining rings2015-05-17

There are many similarities in production, manufacturing, and characteristics between ear free retaining rings and spiral retaining rings. They are both made by flattening and winding steel wires, and undergo heat treatment and surface treatment to h…

The Function of Wave Washers2015-05-10

Waveform washers are thin circular elastic metal components composed of many peaks and valleys. They are made of high-quality spring steel and undergo special heat treatment. The hardness is then controlled according to requirements.

Detection method of retaining ring2015-05-04

The retaining ring mainly plays a role in tightening the axial direction, with the conical surface fixed by the retaining ring having a relatively high degree of centering. The edge guard is a narrow shoulder parallel to the rolling direction and pro…

Mold structure of hole retaining ring2015-04-26

The hole retaining ring mold adopts progressive die manufacturing to overcome complex manufacturing and implements a multi station centralized process plan.

Performance and installation of shaft retaining rings2015-04-20

The fixation of components on the shaft is divided into axial fixation and circumferential fixation. The retaining ring for the shaft mainly serves to tighten the axial direction, with the conical surface fixed with a retaining ring having a high deg…

Specification of waveform washer2015-04-12

Waveform washers, also known as waveform springs, are thin circular elastic metal components composed of multiple peaks and valleys.

What are the functions of the retaining ring2015-04-03

The retaining ring is a ring shaped component fastened to the shaft, which can prevent other parts installed on the shaft from loosening and falling off. Made using wire punching technology, with a circular cross-section.

Design requirements for corrugated washers2015-03-26

Waveform washers are thin circular metal components composed of multiple peaks and valleys, and have good elasticity.

The following are the relevant waveform washer parameters2015-03-22

The following are the relevant waveform washer parameters

A Method for Optimizing the Elastic Performance of Waveform Washers2015-03-12

The maximum rebound amount of the waveform washer is established as the optimization objective. Based on the tightness analysis of the connection system, an elastic optimization design method for the waveform washer has been developed, and a design c…

Mainly introduce the mechanical properties of the retaining ring:2015-03-04

Mechanical properties of the retaining ring 1. Material of the retaining ring: 65Mn 60Si2MnA2. Heat treatment of the retaining ring: d ≤ 48, quenched and tempered HRC47-54 or HV470-580>48, quenched and tempered HRC44-51 or HV435-5303. Elastic in…

Special use of medium retaining rings2015-02-26

A medium-sized retaining ring is a separable ring inside a roller bearing with two or more rows of rollers, used to isolate and guide the two rows of rollers.